index

*FODDER PRODUCING PLANTS*
Conception of the fodder producing plants for the utilization and processing of feeding raw materials produced in a mild climate zone i.e. above all of cereals (and of products yielded from them), secondary products from the processing of rape and sunflower, even various utilizable waste products from the meat, diary, fermenting industry and so on. The producing process is continual. It can be partially or entirely automated. Work of attending staff is mostly limited to the following of function and to the correction of the automated control system, and/or to the setting-up of some machines according to data of the control system, occassional cleaning of the equipment and it´s normal adjustment. The control room is a permanent workplace. The operating spaces have a character of walk-around workplaces. Quality of produced fodder complies with the requirements for the nurture of animals it is intended for. Its precise definition forms, in individual cases, are the subject matter of the contract. The granulating line is as a fully integrated part of the technology of the producing plants of feeding mixture is stated only in a variant of the universal producing plant with capacity of 10 t/h and more. But it can be introduced even to smaller equipment, and/or as an additionally supplied device. In a similar way can be also solved the enrichment of mixtures with fat, molasses, or with another liquid ingredients.
*PRESSING PLANTS FOR VEGETAL OILS*
The conception of the pressing plants is designed for the treatment of oil-plants produced. Oil is obtained by pressing from sunflower or rape seed, pretreated by crushing and - as the cause may be - by flocculation, with large presses possibly also by preheating the material in the flake heater. The installations of the pressing plant make it possible to take in the raw material. Further, the seed is transfered by manipulation lines to the final cleaning and then to the feeding bin situated directly above the presses. The pressed-out oil is conducted into the manipulation tanks and from these to the further treatment. Also manipulation with the oilcakes forms a part of the pressing plant; they are by transport lines stored in the dispatch bins. The raw oil from the presses is, as arule, at first filtered on a screen filter. The rough sediments are separated and returned to the presses. the oil is further treated by fine filtration an a special sluicing filter. After a check in an interoperation tank the treated oil is transfered to the storage tanks. The production process is continuous. The quality of the oil produced complies with the demands for the application in food industry.
*SCREW CONVEYORS*
	type	capacity
	DŠK 100	3 t/h
	DŠK 160	6 t/h
	DŠK 200	12 t/h
	DŠK 250	20 t/h
	DŠK 320	29 t/h
	DŠK 400	40 t/h
	DŠK 500	50 t/h
	DŠK 600	60 t/h

PIPE SCREW CONVEYORS TŠ 160, TŠ 200, TŠ 250 A TŠ 320 - suitable for transport of cereals and mixtures to ascent higher than 25 degrees. Capacities are various and depend on ascent. EXPORTING PIPE AND REDLER CONVEYORS - suitable to be placed under the storage bins or as a dosage device for weighting machines.
*BUCKET ELEVATORS*
	type	capacity	use
	EK 100	5 t/h	suitable for cereals and groats
	EK 155	30 t/h	suitable for cereals and groats
	EV 100	30 t/h	suitable for cereals
	EV 155	60 t/h	suitable for cereals
	Lower elevator head can be made to move the bottom of the head while tightening the belt conducting drum (constant distance between the drum and elevator bottom is secured).

*REDLER CONVEYORS*
	type	capacity	use
	RT 160	30 t/h	suitable for cereals
	RT 260	65 t/h	suitable for cereals
	RT 360	120 t/h	suitable for cereals
	RTD 160	30 t/h	suitable for cereals
	RTD 260	65 t/h	suitable for cereals
	RTD 360	120 t/h	suitable for cereals
	RTV 160	30 t/h	suitable for cereals
	RTV 260	65 t/h	suitable for cereals
	RTV 360	120 t/h	suitable for cereals

All of the mentioned redler conveyors could be optionally produced in unresidual version. Either to avoid noisiness or to extend life it is possible to cover the transport chain using plastic protectors. Plastic protectors may not be used in case of the unresidual version.
*DESCENT TRANSPORT ELEMENTS AND DUST SEPARATORS*

	Flaps, blocks manually, electrically and pneumatically operated, descent transport pipelines, dust separators etc. For more information go to price list.